From a Windows host/Operating System you can visit http://www.imgburn.com/ and download the image burning software and follow the easy GUI-Graphical User Interface and easily burn a Sparkylinux CD version ISO or Sparkylinux DVD version iso and after burning the media/CD or DVD you can boot it from media and you can do two things.

1. Use LIVE MODE

or

2. Install Sparkylinux.

You can even choose to install Sparkylinux from LIVE MODE.

LIVE MODE is exclusive to many Linux editions like Sparkylinux where you can try the Linux without installing it to the Hard Disk-HDD. If you like the Live version then you can continue to install it to the Hard Disk-hdd. Try it before you install it is what you get with live CD/DVD.

You can also install Sparkylinux from USB Pen drive. Live mode and installation is faster if you use Pen drive and you need not buy additional disks every time you download an updated iso.

When it comes to updated linux iso Sparkylinux is very handy. You need not download new iso every time a new Sparky version is released, why? Why because Sparkylinux is a rolling release linux distribution so once you install it, technically you can keep updating it without any re-installation.

If you are using Windows how do you burn Linux ISO to USB?

On Windows buring a linux iso to pen drive is not the same as burning to pen drive using windows iso on windows or burning to pen drive using a linux iso on linux.

Simply put it'a different. Thankfully there are tools that allow you to perform this task.

So the question is “How to write Sparkylinux iso to pen drive on Windows host?”

To run Sparkylinux from a USB stick, the first thing you need to do is insert a USB stick with at least 2GB of free space into your PC.

The easiest way to put Sparkylinux onto your stick is to use the USB installer provided at pendrivelinux.com. You’ll need to download and install and follow the instructions.

http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/#button

Select 'Sparkylinux'.

Click 'Browse' and open the downloaded ISO file.

Choose the USB drive and click 'Create'.

Now you can boot Sparkylinux from your Pen drive using Windows host.

There are a few applications working with graphical interface (GUI) to make a copy of Sparky onto an USB stick.

1. Mintstick - available in Linux Mint and its derivatives and SparkyLinux as well.

Simply choose Sparky iso image from your hard drive and USB stick.

2. Live USB Creator - Sparky's tool which uses 'dd' command.

Choose Sparky iso image from your hard drive and USB stick.

3. Unetbootin - available in most Linux distributions.

On a Linux host you can use this command to know your USB-pen drive's drive assignment

is it sdb or is it sdc or is it sde?

Open terminal Ctrl+alt+t or open terminal from menu, any terminal will do.

Type

 sudo fdisk -l

and then enter your “root” or admin password.

and it will show your pen drive letters.

Next step is to erase previous partition info from your usb,

backup your data before you format your pen drive

sdb is your usb or is it sdc? Check it before you go further…

Enter the below command into terminal and make sure you change the below command with correct drive letter of your pen drive/usb.

 sudo dd if=/dev/zero of=/dev/sdb bs=512 count=16

Then unmount your pendrive or usb

A USB key device, assuming that it had been mounted in the directory /mnt/usb, would be unmounted with the following:

 umount /mnt/usb

Or you can open a file manager and unmount the pendrive by right clicking on the left pane where the usb drive is displayed.

Format it to FAT32 using this command, use correct letter, is it sdb or is it sdc or sde?

 sudo mkfs.vfat -n '' -I /dev/sdb

Now you can use Sparky's usb image format application or gparted which ia available in any linux.

If gparted application is not installed you can install using a package manager for your Linux distribution.

Open gparted

gparted — create MS-DOS partition table and format to FAT32

Now copy Sparky iso image to USB disk:

 sudo dd if=~/Desktop/sparkylinux.iso of=/dev/sdx oflag=direct bs=1048576

Where '~/Desktop/sparkylinux.iso' is the name and location of your downloaded image (located at the desktop in this example) and '/dev/sdx' is the target USB drive. If your system doesn't support 'oflag=direct', you can just leave it out as it is simply intended to speed up the process a bit.

If you don't know about the target USB drive path, run this command and figure out your destination drive.

 sudo fdisk -l

Warning: Make sure to set the correct device path, as this process will delete all data that was on the specified device previously!

Remember, don't include an integer for the USB drive, e.g. '/dev/sdx1', as it would refer to the existing partition on that drive and not the drive itself.

When the USB has been properly created by 'dd', there should be an output similar to this:

 sudo dd if=~/Desktop/sparkylinux.iso of=/dev/sdb oflag=direct bs=1048576 

 706+1 records in

 706+1 records out

 740601856 bytes (741 MB) copied, 91.7024 s, 8.1 MB/s